General Specs - Truck

Willys Truck Illustration

Model L6-226 4WD Pickup Truck, Stake Truck
Engine L6-226
Type L-head
Number of cylinders 6
Bore 3 5/16"
Stroke 4 3/8"
Displacement 226.2 cu. In.
Ignition Timing 5° BTC
Compression Ratio 6.86 to 1
Compression Pressure 125 to 140 psi.
Horsepower (max. brake) 105 at 3600 rpm.
Horsepower (SAE) 26.33
Torque
(max. at 1400 rpm)		 190 lb-ft.
Wheelbase 118"
Tread: Front 57"
Tread: Rear 63 1/2"
Height (over all) 74 3/8"
Length (over all) 183 3/4"
Width (over all) 73"
Ground Clearance 7 3/4"
Gross Vehicle Weight (GVW) 6000 lb.
Weights (approximate): Shipping (less fuel, oil, water)
Pickup 3176 lb.
Stake 3341 lb.
Capacities:
Fuel Tank 15 gal.
Cooling System:
Without heater 12 qt.
With heater 13 qt.
Model F4-134 4WD Pickup Truck, Stake Truck
Engine F4-134
Type F-head
Number of Cylinders 4
Bore 3 1/8"
Stroke 4 3/8"
Displacement 134.2 cu. In.
Ignition Timing 5° BTC
Compression Ratio 6.9 to 1
Compression Pressure 120 to 130 psi.
Horsepower (max. brake) 72 at 4000 rpm.
Horsepower (SAE) 15.63
Torque
(max. at 2000 rpm)		 114 lb-ft.
Wheelbase 118"
Tread: Front 57"
Tread: Rear 63 1/2"
Height (over all) 74 3/8"
Length (over all) 183 3/4"
Width (over all) 73"
Ground Clearance 7 3/4"
Gross Vehicle Weight (GVW) 6000 lb.
Weights (approximate): Shipping (less fuel, oil, water)
Pickup 3065 lb.
Stake 3230 lb.
Curb (including fuel, oil, water):
Pickup 3200 lb.
Stake 3365 lb.
Capacities:
Fuel Tank 15 gal.
Cooling System:
Without heater 11 qt.
With heater 12 qt.

* Excerpt from the Service Manual for Jeep Utility Vehicles page 4